USING THE COMPACT MAT CUTTER
1.Remove the slip sheet.
2.Lay the matboard face down. Use a ruler and pencil to measure and mark the size required on the back of the matboard. Note: Only the 32” side of a full sheet of mat board can be inserted into a Compact Mat Cutter.” (models 301-1 and 350-1)
3.Remove the mat guide.
4.Insert the matboard into the cutter face down, lining up one of the pencil lines with the bar.
5.Using the 90-degree straight cutter, slice the board to the desired size
(90 degree straight cutter included with model 350-1 Compact Elite only).
6.Turn the board and repeat the procedure.
Use the straight cutter to trim matboards.