Introduction to Picture Framing & Matting
Designing Your Picture Frames and Mats
- Mat Styles
- Determine Window Size
- Designing Mats for Standard Size Frames
- Designing with Standard Sizes
- Mat Size and Proportion
- Mat Proportion
- Should Mat Bottom be Wider?
- Trends in Matting Design
Measuring and Sizing Picture Frames and Mats
- Measuring and Sizing Picture Frame Mats
- Border Finder
- Measuring for Mats
- How to Calculate Border Size
Costs of Picture Framing
DIY Picture Frames
Cutting mat board sheet to size
- Making the Most of a 32 x 40 Sheet
- Trimming Mat Board to Size
- Trimming Mat Board to Size with Straight Edge
- Trimming Mat Board to Size with Compact
- Trimming Mat Board to Size with Simplex
- Mat Cutting
- Cutting Single Mat Using a Straight Edge
- Cutting a Single Mat With a Simplex-Basics
- Cutting a single mat with a simplex-detailed
- Cutting a double mat
- Cutting a double mat- detailed professional version
- The professional framers secret for cutting a double mat
- How to measure and cut a double mat,
- Cutting a stepped corner mat – basics
- Cutting stepped corner mats – detailed
- Offset (stepped) corner mat
- Cutting a v groove mat with the trim –and-tape method
- Cutting a v groove with the tape – and –flip method
- Cutting a v groove using a logan V groover (discontinued)
Mat Cutter Choices
Mat Cutting Help, Troubleshooting and FAQs
- Slip sheets
- The importance of using a slip sheet when cutting
- The importance of using a backing sheet
- Why am I getting a ragged cut?
- How to avoid rough or ragged edges when cutting mats
- Dealing with inconsistencies in the bevel edges
- Adjusting your mat cutter for proper blade depth
- The importance of proper blade depth
- Why am I getting a hook in the corners or curve in the bevel cut?
- How come I don't cut all the way through the mat board?
- How to conquer overcuts and undercuts?
- Dealing with overcuts and undercuts
- Why am I getting overcuts in the corners?
- Why are my mats not coming out square?
- Why is my bevel cut going the wrong way?
- How to cut left handed
- How to cut a 40" sheet of mat board on the 32" compact mat cutter
- Is using production stops the fool proof way to get perfect mats?
- Tips for working with production stops on your mat cutter
- Basic mat cutter maintenance
Mounting Your Artwork
Methods of Mounting
- Mounting your artwork
- Grappling with conservation and archival mounting concerns
- Supporting Artwork
- Hinge mounting T, V and S methods
- A simple method to a T-hinge mount
- Trapping methods
- Permanent mounting
- Wet mounting
- Pressure sensitive adhesive mounting
- How to mount artwork using positionable mounting adhesive (PMA)
- Spray adhesives
Glazing with Glass and Plastic
Securing or Fitting your Artwork in a Picture Frame
Finishing Your Artwork
1. Trim a matboard to 11" x 14".
2. On the face of the matboard, measure and mark 5 ." from the sides and top to find the center of the circle.
3. Cut a 6" circle (see Cutting a Circle on page 52) from that center point. Tape the dropout back in place with removable tape before proceeding.
4. Flip the matboard face down. Measure and mark 2 ." on the sides and bottom.
5. Using the straight-line cutter, cut the sides and bottom. Take care on the join of the circle and sides.
6. Remove the fallouts. Use an emery board to smooth rough connections if necessary.