- Making the Most of a 32 x 40 Sheet
- Trimming Mat Board to Size
- Trimming Mat Board to Size with Straight Edge
- Trimming Mat Board to Size with Compact
- Trimming Mat Board to Size with Simplex
- Mat Cutting
- Cutting Single Mat Using a Straight Edge
- Cutting a Single Mat With a Simplex-Basics
- Cutting a single mat with a simplex-detailed
- Cutting a double mat
- Cutting a double mat- detailed professional version
- The professional framers secret for cutting a double mat
- How to measure and cut a double mat,
- Cutting a stepped corner mat – basics
- Cutting stepped corner mats – detailed
- Offset (stepped) corner mat
- Slip sheets
- The importance of using a slip sheet when cutting
- The importance of using a backing sheet
- Why am I getting a ragged cut?
- How to avoid rough or ragged edges when cutting mats
- Dealing with inconsistencies in the bevel edges
- Adjusting your mat cutter for proper blade depth
- The importance of proper blade depth
- Why am I getting a hook in the corners or curve in the bevel cut?
- How come I don't cut all the way through the mat board?
- How to conquer overcuts and undercuts?
- Dealing with overcuts and undercuts
- Why am I getting overcuts in the corners?
- Why are my mats not coming out square?
- Why is my bevel cut going the wrong way?
- How to cut left handed
- How to cut a 40" sheet of mat board on the 32" compact mat cutter
- Is using production stops the fool proof way to get perfect mats?
- Tips for working with production stops on your mat cutter
- Basic mat cutter maintenance
- Mounting your artwork
- Grappling with conservation and archival mounting concerns
- Supporting Artwork
- Hinge mounting T, V and S methods
- A simple method to a T-hinge mount
- Trapping methods
- Permanent mounting
- Wet mounting
- Pressure sensitive adhesive mounting
- How to mount artwork using positionable mounting adhesive (PMA)
- Spray adhesives
We receive calls from time to time on the subject of left-handed cutting. The answer is yes, you can cut left-handed with Logan equipment. The trick seems to be that a left-handed person can operate the cutting head from the opposite direction a right-handed person would. This allows the lefty to use their left hand to manipulate the cutting head and still see the start and stop line to achieve good corners.
To use a #2000 or #302 "Push-Style" cutting head:
Go to the other end of the mat board as you would when right hand cutting. Place the left hand on the cutting head, insert the blade and pull the cutting head towards yourself. Keep the wrist elevated so as to see the start and stop indicator.
To use a #3000, #4000 or #702 "Pull-Style" cutting head:
Go to the other end of the mat board as you would when right hand cutting. Place the left hand on the cutting head, insert the blade and push the cutting head away from yourself. Keep the wrist elevated so as to see the start and stop indicator.