- Mat Styles
- Determine Window Size
- Designing Mats for Standard Size Frames
- Designing with Standard Sizes
- Mat Size and Proportion
- Mat Proportion
- Should Mat Bottom be Wider?
- Trends in Matting Design
- Measuring and Sizing Picture Frame Mats
- Border Finder
- Measuring for Mats
- How to Calculate Border Size
- Making the Most of a 32 x 40 Sheet
- Trimming Mat Board to Size
- Trimming Mat Board to Size with Straight Edge
- Trimming Mat Board to Size with Compact
- Trimming Mat Board to Size with Simplex
- Mat Cutting
- Cutting Single Mat Using a Straight Edge
- Cutting a Single Mat With a Simplex-Basics
- Cutting a single mat with a simplex-detailed
- Cutting a double mat
- Cutting a double mat- detailed professional version
- The professional framers secret for cutting a double mat
- How to measure and cut a double mat,
- Cutting a stepped corner mat – basics
- Cutting stepped corner mats – detailed
- Offset (stepped) corner mat
- Cutting a v groove mat with the trim –and-tape method
- Cutting a v groove with the tape – and –flip method
- Cutting a v groove using a logan V groover (discontinued)
- Slip sheets
- The importance of using a slip sheet when cutting
- The importance of using a backing sheet
- Why am I getting a ragged cut?
- How to avoid rough or ragged edges when cutting mats
- Dealing with inconsistencies in the bevel edges
- Adjusting your mat cutter for proper blade depth
- The importance of proper blade depth
- Why am I getting a hook in the corners or curve in the bevel cut?
- How come I don't cut all the way through the mat board?
- How to conquer overcuts and undercuts?
- Dealing with overcuts and undercuts
- Why am I getting overcuts in the corners?
- Why are my mats not coming out square?
- Why is my bevel cut going the wrong way?
- How to cut left handed
- How to cut a 40" sheet of mat board on the 32" compact mat cutter
- Is using production stops the fool proof way to get perfect mats?
- Tips for working with production stops on your mat cutter
- Basic mat cutter maintenance
- Mounting your artwork
- Grappling with conservation and archival mounting concerns
- Supporting Artwork
- Hinge mounting T, V and S methods
- A simple method to a T-hinge mount
- Trapping methods
- Permanent mounting
- Wet mounting
- Pressure sensitive adhesive mounting
- How to mount artwork using positionable mounting adhesive (PMA)
- Spray adhesives
This type of mat is very popular for photographs and memorabilia, which means there are often several different sizes to work with. On a project with many mat openings, layout time may be more than actual cutting time. Once any plan has been worked up—save it! It may come in handy again.
THE FAMILY GROUPING
outside: 16" x 20"<
>openings: four 3" x 3"two 2" x 3"
one 3" x 4"
two 4" x 6"
When designing a mat with multiple openings, cut pieces of paper to represent each opening, then experiment with papers on a blank piece of matboard. When the design looks good, mark layout and cut mat.