Introduction to Picture Framing & Matting
Designing Your Picture Frames and Mats
- Mat Styles
- Determine Window Size
- Designing Mats for Standard Size Frames
- Designing with Standard Sizes
- Mat Size and Proportion
- Mat Proportion
- Should Mat Bottom be Wider?
- Trends in Matting Design
Measuring and Sizing Picture Frames and Mats
- Measuring and Sizing Picture Frame Mats
- Border Finder
- Measuring for Mats
- How to Calculate Border Size
Costs of Picture Framing
DIY Picture Frames
Cutting mat board sheet to size
- Making the Most of a 32 x 40 Sheet
- Trimming Mat Board to Size
- Trimming Mat Board to Size with Straight Edge
- Trimming Mat Board to Size with Compact
- Trimming Mat Board to Size with Simplex
- Mat Cutting
- Cutting Single Mat Using a Straight Edge
- Cutting a Single Mat With a Simplex-Basics
- Cutting a single mat with a simplex-detailed
- Cutting a double mat
- Cutting a double mat- detailed professional version
- The professional framers secret for cutting a double mat
- How to measure and cut a double mat,
- Cutting a stepped corner mat – basics
- Cutting stepped corner mats – detailed
- Offset (stepped) corner mat
- Cutting a v groove mat with the trim –and-tape method
- Cutting a v groove with the tape – and –flip method
- Cutting a v groove using a logan V groover (discontinued)
Mat Cutter Choices
Mat Cutting Help, Troubleshooting and FAQs
- Slip sheets
- The importance of using a slip sheet when cutting
- The importance of using a backing sheet
- Why am I getting a ragged cut?
- How to avoid rough or ragged edges when cutting mats
- Dealing with inconsistencies in the bevel edges
- Adjusting your mat cutter for proper blade depth
- The importance of proper blade depth
- Why am I getting a hook in the corners or curve in the bevel cut?
- How come I don't cut all the way through the mat board?
- How to conquer overcuts and undercuts?
- Dealing with overcuts and undercuts
- Why am I getting overcuts in the corners?
- Why are my mats not coming out square?
- Why is my bevel cut going the wrong way?
- How to cut left handed
- How to cut a 40" sheet of mat board on the 32" compact mat cutter
- Is using production stops the fool proof way to get perfect mats?
- Tips for working with production stops on your mat cutter
- Basic mat cutter maintenance
Mounting Your Artwork
Methods of Mounting
- Mounting your artwork
- Grappling with conservation and archival mounting concerns
- Supporting Artwork
- Hinge mounting T, V and S methods
- A simple method to a T-hinge mount
- Trapping methods
- Permanent mounting
- Wet mounting
- Pressure sensitive adhesive mounting
- How to mount artwork using positionable mounting adhesive (PMA)
- Spray adhesives
Glazing with Glass and Plastic
Securing or Fitting your Artwork in a Picture Frame
Finishing Your Artwork
HINGING PAPER ART
Pocket corners and mounting strips may be used separately or in combinations to hold artwork against the back support. It is important to allow some room for movement, or buckling will occur with changes in humidity.
Pocket corners and mounting strips are available in art supply stores, photography suppliers, or craft supply stores.
Mounting corners and mounting strips are good choices, because they make no adhesive contact at all with the art, but be sure they are made from non-acidic materials like acid-free paper or polyester material such as Mylar®.